Jarocin insulation - Jarlep asphalt GM solution
Price on request
Product description
JARLEP GM is a homogeneous black liquid solution for cold use without heating. Thanks to the use of high-quality asphalt, solvent and synthetic rubber, the solution has a wide range of applications and excellent performance parameters:
- reduced solution consumption per m2 of substrate - from 0.2 - 0.6 l / m2 depending on the type and condition of the substrate,
- more than twice as high performance, especially at reduced temperatures, which significantly reduces consumption;
- ability to dry quickly in up to 30 minutes at +23 C, which speeds up construction work;
- twice the depth of penetration deep into the primed substrate;
- significantly increased adhesion to all substrates found in construction;
- consistency facilitating spreading, which reduces the burden of work and the consumption of the solution;
- increased resistance to frost cracking, thanks to the use of synthetic rubber in;
Destiny
- priming new and old, refurbished concrete substrates before covering with weldable roofing felt; lightweight moisture insulation of foundations and foundation benches as well as balcony and terrace in;
- priming old roofing sheets in case of renovation;
- priming the element in metal, sheet metal, planks, roofing before covering with welding paper;
- priming all building substrates for self-adhesive roofing felt;
- impregnation and priming of wooden and wood-based substrates (chipboards, OSB) for heat-sealable roofing felt;
- insulation of manure plates, slurry tank, process water tank, concrete coil, septic tanks, etc .;
- anti-corrosive protection of steel structures, also galvanized;
- painting metal, wooden and concrete fences
Method of use
The solution is applied to a dry, cleaned from loose dirt, rust, etc. substrate with a roofing brush, brush, roller or spray. Optimal application temperature - above +5 C. On cooler days, to facilitate spreading the solution on the surface and reduce specific consumption, the packaging with JARLEP GM should be stored for 24 hours in a heated room before use.
Technical data
- expenditure:
- 0,2 - 0,6 l/m²
- flash-point:
- 31 - 40 °C
- minimum temperature of:
- + 5 °C
- capacity in liters:
- 10 l