Ceresit - specialist renovation plaster CR 62

Ceresit CR 62 is used for making plaster in renovation thicknesses from 10 to 30 mm. It is designed especially for historic buildings, for renovation of damp and salty walls. It allows to obtain a dry surface of basement walls and facades. CR 62 can be used on large surfaces and for local repairs. Suitable for low strength substrates with low, medium and high salinity. Plaster CR 62 with the addition of Ceresit CC 81 contact emulsion can be an openwork coat that increases the adhesion of subsequent layers. Do not use on gypsum substrates, or to protect the wall against ground moisture, under water, etc.

Technical data

• compressive strength after 28 days according to DIN 1164: 1.5 to 5.0 MPa
• capillary rising of water W 24 according to DIN 52617: approx. 1.0 kg / m2
• coefficient of water vapor diffusion resistance according to DIN 52615: below 12
• air pore content in fresh mortar according to DIN 52615: approx. 30%
• content of air pores in the mortar in accordance with DIN 52615: above 40%
• the product has the required documents allowing use.

attention

Xi, Irritant. Irritating to eyes, respiratory system and skin. Risk of serious damage to eyes. May cause sensitization by skin contact.