Yetico - Styrofoam board Facade Beta

Name: Yetico - Styrofoam board Facade Beta
Brand: Yetico
SKU: 20832
Price: 169.74 PLN
Availability: InStock

Yetico

zł169.74

Tax included

Application: external thermal insulation performed by the light-wet method [BSO], external thermal insulation performed by the light-dry method, internal thermal insulation of walls, external horizontal thermal insulation requiring the transmission of light mechanical loads or not requiring the transmission of mechanical loads, among others: ceilings with cladding, floors between joists, light skeletal ceilings with cladding, between rafters, ventilated roofs, reinforced concrete ceilings, steep roofs under and between rafters.

Dostępny

external thermal insulation made by light-wet method [BSO]
external heat insulation made using a light-dry method
internal thermal insulation of walls
external horizontal thermal insulation requiring low mechanical loads or no transfer
mechanical loads, among others:
- from below with cladding
- floor between joists
- light ceilings in skeletal with facing
- between the rafters
- roofs in ventilated
- ceiling in reinforced concrete
- roof in steep under and between the rafters

attention

The standard overall dimensions are 1000 x 500 x thickness [mm]. The range of manufactured thicknesses is 10-200 mm with 10 mm increments. Plate finish: smooth or milled overlap edges. Dimensions and edge finish should be given in the comments to the order.

BETA FASADA foam boards cannot be used in direct contact with substances that have a destructive effect on polystyrene, e.g. organic solvents such as acetone, benzene, turpentine, gasoline.

Due to frequent price movements, for reasons beyond our control, please confirm the price when purchasing.

Brand
In stock

1000 Items
MPN

20832

width

500 mm
fire classification - reaction to fire

E
thermal conductivity λ

0,042 W/mK
length

1000 mm
thickness range

10 - 200 mm
thickness (dimensional tolerance class)

± 1 mm
length (dimensional tolerance class)

± 2 mm
width (dimensional tolerance class)

± 2 mm
squareness (dimensional tolerance class)

± 5/1000 mm/mm
flatness (dimensional tolerance class)

± 10 mm
flexural strength

≥ 75 kPa
tensile strength perpendicular to faces

≥ 80 MPa
dimensional stability under constant normal laboratory conditions DS(N)2

± 0,2 %
Dimensional stability under specified temperature and humidity DS(70,-)2

<= 2 %
depth of the cutter

15 mm