Stuccoco Guss SG 87 is a mortar for making small stucco castings with a maximum volume of up to 13 liters. Especially the fast setting of the material allows removing the casting in molds after 1.5 - 2 hours. (for elements with deep undercuts should be kept longer) and allows rational work. Stuccoco Guss mortar should not be used to produce parts with a large volume and / or large thickness differences, as they could have shrinkage cracks. Stucco castings can be used in interior and exterior applications. Stuccoco Guss SG 87 is not suitable for window sills and roofs, walls, load-bearing components and areas where long-term strong moisture can be expected (e.g. in the plinth area, etc.). For stucco works on insulation systems, extruded polystyrene fittings, etc. should be used. Stuccoco Guss SG 87 is characterized by fast material binding and achieves high compressive strength. Thanks to the very good flow, closed surfaces are obtained on the finished castings.
Technical data
- compressive strength (28 days):> 6 N / mm,
- usage time: approx. 5-10 min. at 20 C / humidity above 65%
- setting time: approx. 1.5-2.5 hours at 20 C / humidity above 65%
- wy b has the required documents authorizing its use.
attention
- Xi irritating
- Irritating to respiratory system and skin.
- Risk of serious damage to eyes.
- Keep away from children.
- Do not breathe dust.
- Avoid contact with skin and eyes.
- In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
- Wear suitable gloves and eye / face protection.
- If swallowed, seek medical advice immediately and show this container or label.
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent