Qmar - universal silicone

Multi-purpose, one-component, fast-setting silicone sealant designed for assembly, general construction and finishing works. After hardening, the mass is resistant to weathering and UV radiation, which, in combination with temperature resistance from -40 C to + 180 C, allows it to be used outside buildings. The product has very good adhesion to non-absorbent materials commonly used in construction. , such as: ceramic tiles (tiles, terracotta, stoneware, clinker), glass and porcelain, faience and enameled elements. Silicone can also be used on surfaces covered with a strongly adhering paint coating and on metal surfaces protected against corrosion (as well as on other unusual surfaces), but such applications should be preceded by making adhesion tests.

Application

assembly and finishing works

properties

• permanently elastic mass after curing
• resistance to weathering and UV radiation
• temperature resistance: from -40 C to + 180 C
• workability up to 5 min
• setting time approx. 2mm / 24h

Substrate preparation and usage

• Surfaces should be clean, dry and free from dust, dirt and grease.
• Before use, cut the end of the tube and screw the applicator on, cutting it to the proper thickness of the weld.
• Squeeze the mass using a suitable gun.
• The applied sealant can be smoothed with a spatula or other tool wetted with a soap solution or other similar agent.

attention

To avoid mistakes, check the suitability of the product for its intended use. Uncured product may be irritating to respiratory system and skin. KEEP AWAY FROM CHILDREN! Shelf life: 18 months.