Ceresit - CN 87 quick-setting floor compound

Ceresit CN 87 is used for laying floor foundations:
- associated with a cement base, 10 to 80 mm thick,
- on a separating layer (e.g. foil, paper), thickness from 35 to 80 mm,
- "floating" on a layer of thermal or sound insulation, thickness from 45 to 80 m. For underfloor heating - the minimum thickness of 45 mm should be increased by the outer diameter of the conductor in heating.
The mortar mixed with water has a dense plastic consistency, allowing the formation of slopes. Primers and floors made of CN 87 (non-reinforced or reinforced) can be used inside or outside buildings. Screeds of mortar CN 87 can be used as the final wear layer, you can also lay ceramic tiles, parquet, make resin floors, or pour floors with Ceresit and Thomsit self-leveling or spreading mortars.

Technical data:
- base: ready-mixed dry mix based on hydraulic binders, modifier and mineral fillers
- bulk density: approx. 1.7 kg / dm3
- mixing ratio: 1.75 - 2.0 l water per 25 kg CN 87
- application temperature: from +5 C to +25 C
- consumption time: up to 40 min.
- pedestrian traffic: after 3 hours
- compressive strength (according to PN-EN 13813): C40
- bending strength (according to PN-EN 13813): F7
- shrinkage (according to PN-EN 13813): 0.80 mm / m
- Abrasion on the Bohme shield (according to PN-EN 13813): A9
- consistency (according to PN-EN 13813): 130
- reaction to fire (according to PN-EN 13813): A1 fl
- release of volatile substances: in accordance with PN-89 / Z-0421/02
- packaging: 25 kg
- quantity on the pallet: 42 pieces
- approximate consumption per m2:
CN 87 approx. 2.0 kg / m2 for every cm of thickness
contact layer approx. 0.25l CC 81 + 3.5 kg CN 87
- the product has the required documents for use.

Warning!
Xi, Irritant. Irritating to eyes, respiratory system and skin. May cause sensitization by skin contact.