Cement mortar, type CG2WA, for pointing 1-20 mm. Creates a ceramic coating that is highly durable during many years of operation. Produced in the form of a dry mix of the highest quality cement binders, fillers, pigments, specially selected fine aggregates and modifying additives.
Features
- elastic - contains fibers
- elimination of microcracks and cracks
- elimination of discoloration and efflorescence
- stain resistant - easy to clean
- very low water absorption
- high resistance to UV radiation
- very high mechanical resistance
- increased adhesion to the edge of the tiles
- resistant to scrubbing and repeated washing, cleaning agents
- application with a rubber trowel
- fine aggregate type CG2WA
Application
The product is suitable for all cladding on any substrate, both for dry, damp and wet rooms, for underfloor heating, deformable substrates, building facades. Indoor and outdoor building. Especially suitable for kitchens, bathrooms, balconies and terraces.
Technical data
- bulk density (of dry mix) about 1.2 kg / dm
- mixing ratio water / dry mix: 0.24-0.27 l / 1 kg; 0.48-0.54 l / 2 kg; 1.20-1.35 l / 5 kg
- minimum / maximum joint width 1-20 mm
- mortar preparation temperature, substrate and ambient temperature during work from +5 C to +35 C
- maturing time about 5 minutes
- standby time approx. 60 min
- pre-wash after 10-30 min
- final washing after 4-8 hours
- light foot traffic after 6-8 hours
- full mechanical load after approx. 24 hours
- full resistance to scrubbing after about 21 days of setting
- full resistance to dirt after about 21 days of setting
- product in accordance with PN-EN 13888: 2010
- abrasion resistance ≤ 1000 mm 3
- water absorption: after 30 min ≤ 2 g; after 240 min ≤ 5 g
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent