Drizoro - renovation mortar for concrete floors Maxpatch M

Maxpatch M gray is a one-component mortar based on special cement, high-quality aggregates and additives. After mixing with water, it forms a mortar of great quality and with excellent mechanical properties (in terms of adhesion, abrasion resistance and compressive strength). It is recommended for renovation and patching of horizontal concrete surfaces, ramps, stairs, industrial concrete floors, etc., where heavy vehicle and pedestrian traffic take place.

Features

• the product can be applied in layers with a thickness of 5-25 mm
• quick re-commissioning of the repaired area: for pedestrian traffic after 24 hours, for road traffic after 5 days
• it can be used to make an anti-slip finish
• great mechanical strength and wear resistance
• good adhesion to concrete
• suitable for filling defects and holes in the substrate
• Also available in white, red and green
• easy to use, well workable

Application

• patching horizontal surfaces to be leveled or raised
• repair and finishing of anti-skid ramps with high resistance to wear caused by vehicle movement
• renovation of concrete stairs
• renovation of floors and concrete floors, drg, loading surfaces and other surfaces exposed to rapid wear in warehouses, garage parking lots, industrial facilities, etc.

Technical data

• the appearance of gray powder
• mixing water (% by weight) 14-16%
• specific gravity of the powder 1.35 0.1 g / cm ³
• specific gravity of dry mortar 2.0 0.1 g / cm ³
• compressive strength after 28 days> 35.0 MPa
• bending strength after 28 days> 8.0 MPa
• adhesion to concrete after 28 days> 1.5 MPa (detachment from the substrate)
• consumption * of pure product 2.0 (kg / m per layer with a thickness of 1 mm)
• minimum / maximum thickness of one layer of clean product 5/25 mm
• package 25 kg bag

* the value may differ from the actual one depending on the porosity and condition of the substrate