Ceresit - quick-setting mortar CN 83

Ceresit CN 83 is intended for use directly on ceilings or concrete floors. It can be used inside and outside buildings. Mortar can be used to repair floors and concrete elements: stairs, landings, ramps, curbs, etc. It can also be used to make heavily loaded utility floors 5 to 30 mm thick warehouses, production halls, workshops, etc. Thanks to the dense plastic consistency, CN 83 enables the formation of slopes in.
The mortar can be painted with concrete flooring paints, e.g. Ceresit CF 34, made with Ceresit CF 37 resin floors or ceramic tiles fixed on it.

Technical data:
- base: cement mix with mineral fillers and modifiers
- bulk density: approx. 1.5 kg / dm3
- mixing ratio: 3.0 l of water per 25 kg
- application temperature: from +5 C to +25 C
- consumption time: up to 40 min.
- pedestrian traffic: after 5 hours
- compressive strength (according to PN-EN 13813): C35
- bending strength (according to PN-EN 13813): F7
- shrinkage (according to PN-EN 13813): 1.33 mm / m
- Abrasion on the Bohme shield (according to PN-EN 13813): A9
- consistency (according to PN-EN 13813): 110
- reaction to fire (according to PN-EN 13813): A1 fl
- release of volatile substances: in accordance with PN-89 / Z-0421/02
- packaging: 25 kg
- quantity on the pallet: 42 pieces
- consumption: approx. 2.0 kg / m2 for each mm of thickness
contact layer approx. 0.25 l CC 81 and 3.5 kg CN 83
- the product has the required documents for use.

Warning!
Xi, Irritant. Irritating to eyes, respiratory system and skin. May cause sensitization by skin contact.